Structural use of timber: an introduction to BS 5268-2:2002

TRADA image

BS 5268 The structural use of timber is the UK code of practice covering the major structural uses of timber, particularly in building. In total it consists of seven parts.

BS 5268-2 Permissible stress design, materials and workmanship brings together design stresses, design methods and some general guidance on the structural use of timber. It covers a wide range of softwoods, hardwoods, panel products and jointing devices, and provides design information for solid timber, glulam and built-up composite structures such as box and I beams

As a consequence of the move to Eurocode, BSI withdrew BS268-2 on 24th November. For the same reason this WIS has not been maintained and does not cover the Amendment issued 1stDecember 2007. However Building Regulations Approved Documents in England, Wales and Northern Ireland have not been revised and still refer to BS5268-2, although the use of Eurocodes is equally acceptable.

 

Contents:

  • Section 1: General
  • Section 2: Timber
  • Section 3: Glued laminated timber
    • Table 1: Softwood species/grade combinations which satisfy the requirements for strength classes C14 - C30
    • Table 2: Hardwood species/grade combinations which satisfy the requirements of strength classes D30 - D70
  • Section 4: Plywood
  • Section 5: Panel products other than plywood
  • Section 6: Joints
  • Section 7: Workmanship, Inspection and maintenance
  • Testing

 

Suggested Reading

Engineered wood productsnavigation-arrow

With engineered timber becoming an increasingly prevalent component in construction, it is important for members of the construction industry to understand not only the benefits and properties of Engineered wood products, but also the different types.

With modified wood products being improved upon on a seemingly daily basis, this...

01/01/2012 |  Choose and Use  

Engineered wood: Fact sheet no. 11navigation-arrow

This wood for good fact sheet is an introductory guide to engineered wood.

This sheet briefly explains engineered wood and then discusses the creation process and a number of the benefits of the different types of engineered woods available, included in which are: engineered timber beams (I-beams), heat treated...

01/01/2004 |  Info from other organisation  

List of Wood Information Sheetsnavigation-arrow

This document contains a fully comprehensive list of all the most up to date Wood Information Sheets (WIS) published by TRADA. Available to members for free or non-members for £12.00, these Wood Information Sheets provide technical guidance related to almost every timber topic under the sun.

 

Categories:

  • Timber -...

24/04/2019 |  Wood Information Sheet