Summary of a compliance road map for the structural fire safety design of mass timber buildings in England

TRADA image

Danny Hopkin and Michael Spearpoint report. 

 

This article is part of a new series, Timber 2020/2021 Industry Yearbook Online.

 

 

 

While every effort is made to ensure the accuracy of these articles, the company cannot accept liability for loss or damage arising from the information supplied. The opinions expressed do not necessarily represent or reflect the views of TRADA. 

Suggested Reading

Wood-based panel products and timber in firenavigation-arrow

This Wood Information Sheet (WIS), intended for designers, specifiers and manufacturers, covers the behaviour of wood-based panel products such as plywood, particleboard and fibreboards, in addition to timber.

Smoke production is also considered.

This Wood Information Sheet applies to the United Kingdom and other jurisdictions where...

24/08/2020 |  Wood Information Sheet  

Upgrading timber joinery doors for fire resistancenavigation-arrow

This Wood Information Sheet gives guidance on assessing the suitability of existing doors for upgrading to give a 20 or 30 minutes' fire resistance comparable with that of purpose-made fire doors. Upgrading to 60 minutes' performance will rarely be possible.

 

Upgrading the fire resistance of existing doors is a...

09/01/2020 |  Wood Information Sheet  

Flame-retardant treatments for timber productsnavigation-arrow

In many situations, timber and wood-based materials may be used in their natural, untreated state. However, flame-retardant (FR) treatments extend their use to situations that demand enhanced 'reaction to fire' properties.

This Wood Information Sheet (WIS) covers treatments that may be applied to wood and wood-based products both...

19/08/2019 |  Wood Information Sheet