Part A - falling behind

TRADA image
TRADA Technology Principal Engineers Dr Hugh Mansfield-Williams and Dr Keerthi Ranasinghe discuss the impact of the Eurocodes of Part A

Article from In Touch with Timber Magazine Issue 4 (Spring 2011)

 

Suggested Reading

Introduction to Eurocode 5navigation-arrow

The Eurocodes are a series of standards that establish common rules across the European Economic Area (EEA) for structural design using main construction materials such as concrete, steel, masonry, timber, aluminium and glass. They allow a designer to prove compliance with the requirements of the European Construction Product Regulation and...

03/05/2018 |  Wood Information Sheet  

Eurocode 5: the supply chain perspectivenavigation-arrow

Senior structural engineer, TRADA Technology Ltd, Dr Keerthi Ranasinghe urges timber and wood suppliers to consider CE marking or third-party certification to take advantage of the way Eurocode 5 has changed the approach to designing in timber.

The key aim of the Eurocodes has been to create a common...

01/01/2011 |  Magazine Article  

GD 5 How to calculate deformations in timber structures using Eurocodesnavigation-arrow

Explains the principles of serviceability limit states set out in Eurocode 0 and shows how to apply them to structural timber members, assemblies and built-up components. Explains timber-specific rules given in Eurocode 5 relating to creep and joint slip. Recommends some deflection limits and provides simple worked examples.

Contents:

...

01/01/2006 |  Other Technical Guidance