Woodwaste it's collection and disposal - Part 2 March 1987
In This Series
- 9 million tramping feet on a hardwood floor
- Solid rectangular column factors (sawn sections) loads at unit stress
- solid rectangular column factors (planed sections) April 1962
- solid rectangular beam factors (sawn sections) uniformly distributed loads at unit stress (continued) - April 1962
- solid rectangular beam factors (planed sections) uniformly distributed loads at unit stress - April 1962

The Importance of Hoods
The main requirement of any woodwaste extraction system is that the waste must move quickly and completely into the system at the entry point, being carried away to a suitable place for disposal The entry point is therefore the most important part of the system because if entry conditions are not right !he rest of the system cannot perform correctly.
Suggested Reading
A short introduction to cross-laminated timber
The well-known environmental advantages of using timber as a construction material, coupled with the wider technical and performance benefits of products such as cross-laminated timber (CLT) and glued laminated timber (glulam), are enabling the construction industry to deliver innovative and cost effective timber buildings.
Article from Timber 2016 Industry Yearbook
01/01/2016 | Magazine Article
Achieving long-lasting timber fencing through specification
Ben Sharples looks at the considerations for durable timber fencing.
Article from the TRADA Timber Industry Yearbook 2015
01/01/2015 | Magazine Article
Aiming high with glulam
Andrew Lawrence, Arup's Timber Specialist, discusses the potential for tall wood buildings.
Article from the TRADA Timber Industry Yearbook 2014
01/01/2014 | Magazine Article