Use of timber in mining - circa 1980s
In This Series
- 9 million tramping feet on a hardwood floor
- Solid rectangular column factors (sawn sections) loads at unit stress
- solid rectangular column factors (planed sections) April 1962
- solid rectangular beam factors (sawn sections) uniformly distributed loads at unit stress (continued) - April 1962
- solid rectangular beam factors (planed sections) uniformly distributed loads at unit stress - April 1962
This book on the use of timber in mining was prepared for the Timber Research and Development Association by Mr C R Lloyd Jones towards the end of a decade of experience as the Association’s Mining Engineer, following earlier work which included periods as a scientist and as a colliery manager.
This document contains a fully comprehensive list of all the most up to date Wood Information Sheets (WIS) published by TRADA. Available to members for free or non-members for £12.00, these Wood Information Sheets provide technical guidance related to almost every timber topic under the sun.
- Timber -...
The resistance to sound is not just a legal requirement; designers should take account of the expected transmission of sound between dwellings, between rooms and from outside, and design the walls and floors accordingly.
The Building Regulations require that occupants of a dwelling be 'reasonably protected' from noise...
Although there is an increasing interest and application in using adhesive-bonded connections for new buildings, the main demand for this technology in the UK is for repairs to structural timbers. The original concept was aimed at repairing historic structures. However, the technology is increasingly being used for repairing modern materials...